APPLICATION
CASE
Application cases of ammonia detector in wastewater treatment plant
Release time:
2024-06-12
Project Introduction
Sludge treatment plant in the production process of a large number of ammonia, due to ammonia is a colourless gas and has a strong irritating odour gas, burns the skin, eyes, mucous membranes of the respiratory organs, people inhale too much, can cause lung swelling, and even death. Many people do not understand the role and operation principle of sludge treatment plant, not to mention that sludge treatment plant will produce a lot of ammonia in the process of sludge treatment. In order to solve the problem of sludge treatment plant in the process of sludge treatment may produce ammonia, ordinary measures, such as with gas masks, anti-corrosion wear equipment, has not been able to do a good job of safety prevention. Therefore, the protection against ammonia gas in sludge treatment plant is very necessary and must be a good preventive work. Polycom project engineering according to the characteristics of the site situation made this set of sewage treatment plant ammonia concentration of real-time online detection system, and create a safe production of sludge treatment plant.
Ammonia real-time online monitoring system for wastewater treatment plant equipment selection
As the ammonia detector alone detection range is 20-30 square metres, so for relatively enclosed environments, such as production workshops and other places, it is good to judge the number of ammonia concentration detector used, just need to be detected by the environment square volume divided by 20-30 square metres can be.
For outdoor and other open-air environment, the number of sludge treatment plant using ammonia concentration detector, you need to consider from a safety and security point of view, this time it is easy to leak ammonia points (pipeline interfaces, etc.) and safety inspection of the designated safety locations must be installed ammonia leak detector device, in this case you need to do the number of ammonia detector for the specific environment to do the customised use of ammonia detector.
Third, the sewage treatment plant ammonia real-time online monitoring system installation precautions
Sewage treatment plant ammonia real-time online monitoring system is composed of two parts of the ammonia detector and alarm controller host, where the gas detector is installed in the operating site, while the alarm control host is installed in the monitoring room and other convenient monitoring environment. Here on the sludge treatment plant ammonia detector installation location, the main choice is easy to leak ammonia location to install the ammonia detector equipment, as well as operators where the operating environment does not affect the normal operation of the location of the installation of the ammonia detector.
Fourth, the sewage treatment plant ammonia real-time online monitoring system debugging, testing precautions
Wastewater treatment plant after the installation of all the equipment, it is necessary to test the equipment and debugging operations, in order to ensure that the supporting equipment can be highly efficient detection of safety leaks, and take timely measures to deal with the real meaning of ammonia from the wastewater treatment plant protection work. Debugging ammonia detector equipment is very simple, only need to connect the power cord to see whether the probe and the host display is normal. And test ammonia detector equipment is also very easy, take a certain amount of ammonia placed in the ammonia detector probe part, when the ammonia concentration appears and reaches the lower limit of the explosion, it will issue an alarm warning prompts, equipped with supporting equipment, then start the linkage settings such as solenoid valves and exhaust fans.
WhatsApp: